Surface Engineering Measurement Standards for Inorganic Materials

Preface.
List of Figures
1. Introduction
2. Organization of the Guide and Locating Standards
2.1 Organization of the Guide
2.2 Locating Standards
3. General Standards for Surface Engineering Measurement
3.1 Terminology
3.2 Laboratory Accreditation
3.3 Sampling

4. Surface Inspection and Product Quality
4.1 General (bare and coated)
4.2 Products (bare and coated)
4.2.1 Fasteners
4.2.2 Sheet and Structural Steel
4.2.3 Castings
4.2.4 Other

5. Surface Finish Evaluation
5.1 General (bare and coated)
5.2 Methods for Specific Products and Processes
6. General Product Quality Standards for Specific Coating Processes
6.1 Anodic Coatings
6.2 Conversion Coatings
6.3 Galvanized Coatings
6.4 Electroplated Coatings
6.5 Diffusion Coatings
6.6 Physical Vapor Deposition (PVD)
6.7 Thermal Spray Deposition
6.8 Glass and Enamel Coatings

7. Standards for Measurement of Surface Treatment Depth Coating Thickness and Mass
7.1 Surface Treatment Depth
7.2 Coating Thickness
7.3 Coating Mass

8. Standards for Analysis of Microstructure
8.1 Metallography
8.2 Porosity and Defect Measurement of Coatings

9. Standards for Measurement of Composition and Crystal Structure
9.1 Composition
9.2 Crystal Structure
10. Standards for Residual Stress and Hardness Measurement
10.1 Residual Stress
10.2 Indentation Hardness Measurements
10.3 Other Hardness Measurements

11. Standards for Mechanical Properties and Adhesion of Coatings
11.1 Mechanical Properties
11.2 Adhesion

12. Standards for Measurement of Corrosion, Wear and Thermal Properties
12.1 Bare
12.2 Coated

13. Surface Engineering Measurement Standards
13.1 ASME (American Society of Mechanical Engineers) Standards
13.2 ASTM International (American Society for Testing and Materials) Standards
13.3 ISO (International Organization for Standardization) Standards
13.4 Military and Industry Standards
13.5 SAE (Society of Automotive Engineers) Standards

14. Index
List of Figures
Figure 1. Quick Guide to Surface Measurement Standards
Figure 2. Applicability of Coating Thickness Measuring Methods

Total 264 pages 3 mb

Download